dmesg - Mobile Intel Pentium III M 1200MHz
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.1 (GENERIC) #0: Fri May 31 08:43:59 UTC 2019
mkrepro@mkrepro.NetBSD.org:/usr/src/sys/arch/i386/compile/GENERIC
total memory = 767 MB
avail memory = 735 MB
rnd: seeded with 128 bits
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Dell Computer Corporation Latitude C610
mainbus0 (root)
ACPI: RSDP 0x00000000000FDE50 000014 (v00 DELL )
ACPI: RSDT 0x00000000000FDE64 000028 (v01 DELL CPi R 27D30510 ASL 00000061)
ACPI: FACP 0x00000000000FDE90 000074 (v01 DELL CPi R 27D30510 ASL 00000061)
ACPI: DSDT 0x000000002FFF0000 003182 (v01 INT430 SYSFexxx 00001001 MSFT 0100000E)
ACPI: FACS 0x000000002FFFF800 000040
ACPI: 1 ACPI AML tables successfully acquired and loaded
cpu0 at mainbus0
cpu0: Mobile Intel(R) Pentium(R) III CPU - M 1200MHz, id 0x6b4
cpu0: package 0, core 0, smt 0
acpi0 at mainbus0: Intel ACPICA 20170303
acpi0: X/RSDT: OemId , AslId
LNKA: ACPI: Found matching pin for 0.31.INTA at func 1: 0
LNKB: ACPI: Found matching pin for 0.31.INTB at func 5: 11
LNKB: BIOS IRQ 11 for 0.31.INTB is invalid
LNKA: ACPI: Found matching pin for 0.29.INTA at func 0: 11
LNKA: ACPI: Found matching pin for 1.0.INTA at func 0: 11
LNKD: ACPI: Found matching pin for 2.1.INTA at func 0: 255
LNKD: ACPI: Found matching pin for 2.1.INTA at func 1: 255
LNKB: ACPI: Found matching pin for 2.3.INTA at func 0: 11
LNKB: BIOS IRQ 11 for 2.3.INTA is invalid
LNKC: ACPI: Found matching pin for 2.0.INTA at func 0: 11
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
acpibat0: Panasonic LION rechargeable battery
acpibat0: granularity: low->warn 0.200 Wh, warn->full 0.200 Wh
acpibat1 at acpi0 (BAT1, PNP0C0A-2): ACPI Battery
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button
MB1 (PNP0C01) at acpi0 not configured
MB2 (PNP0C01) at acpi0 not configured
MB3 (PNP0C01) at acpi0 not configured
MB5 (PNP0C01) at acpi0 not configured
pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
pckbc2 at acpi0 (KBC, PNP0303) (kbd port): io 0x60,0x64 irq 1
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61,0x63,0x65,0x67
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
MB4 (PNP0C01) at acpi0 not configured
COPR (PNP0C04) at acpi0 not configured
FDC0 (PNP0700) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
ECP (PNP0401) at acpi0 not configured
MB6 (PNP0C01) at acpi0 not configured
MB8 (PNP0C01) at acpi0 not configured
acpivga0 at acpi0 (VID): ACPI Display Adapter
acpiout0 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (LCD, 0x0110): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout0): Ext. Monitor, head 0, bios detect
acpivga0: 0x0110 (acpiout1): LCD Panel, head 0, bios detect
acpitz0 at acpi0 (THM)
acpitz0: levels: critical 100.0 C, passive cooling
apm0 at acpi0: Power Management spec V1.2
ACPI: Enabled 2 GPEs in block 10 to 1F
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pms0: Synaptics touchpad version 5.7
pms0: Passthrough, Palm detect, Multi-finger
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: This pci host supports neither MSI nor MSI-X.
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 3575 (rev. 0x04)
agp0 at pchb0: can't find internal VGA config space
ppb0 at pci0 dev 1 function 0: vendor 8086 product 3576 (rev. 0x04)
pci1 at ppb0 bus 1
pci1: This pci host supports neither MSI nor MSI-X.
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: vendor 1002 product 4c59 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
uhci0 at pci0 dev 29 function 0: vendor 8086 product 2482 (rev. 0x02)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
ppb1 at pci0 dev 30 function 0: vendor 8086 product 2448 (rev. 0x42)
pci2 at ppb1 bus 2
pci2: This pci host supports neither MSI nor MSI-X.
pci2: i/o space, memory space enabled
ex0 at pci2 dev 0 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt (rev. 0x78)
ex0: interrupting at irq 11
ex0: MAC address 00:08:74:96:53:55
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0 at pci2 dev 1 function 0: vendor 104c product ac51 (rev. 0x00)
cbb1 at pci2 dev 1 function 1: vendor 104c product ac51 (rev. 0x00)
bwi0 at pci2 dev 3 function 0: Broadcom Wireless
LNKB: Picked IRQ 9 with weight 0
bwi0: interrupting at irq 9
bwi0: BBP id 0x4318, BBP rev 0x2, BBP pkg 0
bwi0: MAC: rev 9
bwi0: PHY type 2, rev 7, ver 3
bwi0: RF manu 0x17f, type 0x2050, rev 8
bwi0: invalid antenna gain in sprom
bwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
bwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
cbb0: read/write bursts enabled
cbb0: cacheline 0x8 lattimer 0x20
cbb0: bhlc 0x822008
cbb0: interrupting at irq 11
cardslot0 at cbb0
cardbus0 at cardslot0: bus 4
pcmcia0 at cardslot0
cbb1: read/write bursts enabled
cbb1: cacheline 0x8 lattimer 0x20
cbb1: bhlc 0x822008
cbb1: interrupting at irq 11
cardslot1 at cbb1
cardbus1 at cardslot1: bus 5
pcmcia1 at cardslot1
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 248c (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 2/37 seconds
ichlpcib0: SpeedStep enabled
piixide0 at pci0 dev 31 function 1: Intel 82801CA IDE Controller (ICH3) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
auich0 at pci0 dev 31 function 5: i82801CA (ICH3) AC-97 Audio
auich0: interrupting at irq 9
auich0: ac97: Crystal CS4205 codec; dedicated mic channel, tone, simulated stereo, bass boost, 20 bit DAC, 18 bit ADC, SRS 3D
auich0: ac97: ext id 0x209
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
auich0: measured ac97 link rate at 47982 Hz, will use 48000 Hz
audio0 at auich0: full duplex, playback, capture, mmap, independent
auich0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
auich0: Latency: 256 milliseconds
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub0 at usb0: vendor 8086 (0x8086) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
IPsec: Initialized Security Association Processing.
wd0 at atabus0 drive 0
wd0:
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 95396 MB, 193821 cyl, 16 head, 63 sec, 512 bytes/sect x 195371568 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
WARNING: 2 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/i386/8.1/modules
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)